For food, people pay great attention to its color and fragrance. In the production process, the food is often smeared, that is, the surface of the formed or non-formed product is evenly coated with the slurry and the marinade to better lock the moisture, umami and nutrients. Keep the original flavor. With the development of automation level, the emergence of sizing machine greatly improves production efficiency, reduces labor intensity, and at the same time ensures food sizing safety and hygiene, and ensures food is safer to eat.
The author understands that sizing is mainly used for the conditioning of fried foods such as fruits and vegetables, meat, and aquatic products. It is blended with starch, egg liquid and other auxiliary materials before heating, and a cooking aid is used to form a slurry film on the surface of the raw material after heating. Conditioning fried foods can shorten the cooking time by sizing, and avoid the generation of harmful substances under high temperature deep frying for a long time.
In addition, adequately maintaining the original flavor of the fried food does not impair the nutrients in the raw material. At the same time, sizing can increase the taste inside the raw materials, so that it can achieve a full range of color and flavor.
According to reports, according to the different process requirements of the product, the slurry is divided into thick slurry and thin slurry, the water content is small, the viscosity is large, and the slurry is thick. It is noted that when sizing, the concentration of the raw materials used in the sizing is different, and the sizing has a certain difference.
At present, the industrial sizing of the fried foods has been automated and mechanized, and the sizing machine can replace the manual sizing, which can control the sizing time, the sizing amount and the sizing action to ensure the sizing quality.
“The sizing machine can set the sizing time and achieve precise control. This can sizing the raw materials for more than 10 minutes before heating. The sizing time should not be too long or too short. In addition, the equipment can also adjust the sizing action according to the size of the raw materials. If the raw materials are small and tender, it is necessary to ensure that the sizing action is gentle, and it is necessary to prevent the raw materials from being crushed, especially chicken silk and fish silk. The sizing is just slower, and when the slurry is covered with raw materials, the action is slightly faster. It relies on the equipment to have a continuous inorganic speed control function," said the manufacturer.
In addition, because the sizing machine adopts special mesh belt dusting technology, the raw material can be evenly mixed, and the powerful fan and vibrator can remove excess powder to prevent the adhesion of raw materials and meet the production process requirements. In addition, a multi-purpose machine is convenient for switching between thick slurry and thin slurry.
It is worth mentioning that the machine is equipped with automatic positioning, automatic sizing, high degree of automation, which not only greatly improves the efficiency of powder coating, but also reduces the food contamination caused by manual operation, thus ensuring the quality and safety of raw materials.
However, users who use the sizing machine encounter these problems to find the cause and solve it in time so that the device can operate normally. If the sizing machine does not work, there may be no voltage in the circuit. At this time, you can check whether the power plug is plugged in and whether the power is turned on. You also need to check the power fuse and fuse, etc., to eliminate the fault and keep the equipment working normally.
If the sizing machine is insufficient for sizing the raw material, the slurry may be too thin. It is best for the user to adjust the slurry concentration or to change the slurry. On the other hand, if there is too much raw material slurry, it may be that the above-mentioned fan and vibrator remove too little slurry. At this time, it is necessary to increase the blowing force of the fan or adjust the vibration amplitude so that the slurry concentration on the raw material is consistent. Processing requirements, so as to avoid too much paste adhesion and affect the quality of raw materials.
